Publications
“Feasibility study of the {$\Gamma-Re_\Theta$} turbulence model for internal mixing”, PFAU - OpenFOAM® User Meeting. 2017.
, “Estimation Methods for Viscosity, Flow Rate and Pressure from Pump-Motor Assembly Parameters”, Sensors, vol. 20, no. 5, p. 1451, 2020.
, “Collocation Method for the Modeling of Membrane Gas Permeation Systems”, International Journal of Nonlinear Sciences and Numerical Simulation, vol. 15, pp. 307–316, 2014.
, “Intracorporeal Membrane Catheter for CO2 Reduction in the Blood - Drive Unit and Control System”, in International Journal of Artificial Organs, 2017.
, “Effect of Different Diesel Fuel Nozzle Holes Geometries on Cavitation”, in Conference on Sustainable Mobility SAE Technical Paper Series, 400 Commonwealth Drive, Warrendale, PA, United States, 2022.
, “Membrane modeling using CFD: Combined evaluation of mass transfer and geometrical influences in 1D and 3D”, Journal of Membrane Science, vol. 563, pp. 199-209, 2018.
, “Investigation of the Pressure Drop of Random Packed Bed Adsorbers”, Chemical Engineering Transactions, vol. 52, pp. 439–444, 2016.
, “Cost efficient CFD simulations: Proper selection of domain partitioning strategies”, Computer Physics Communications, vol. 219, pp. 121–134, 2017.
, “Designing Better Membrane Modules Using CFD”, in Proceeding Book, 2015.
, “Grid Dependency Study in CFD Computation of Flow Structure in a T-Mixer”, in 13th Minisymposium Chemical and Process Engineering, Innsbruck, Austria, 2017.
, “Numerical Investigation of Particle Types Influence on Packed Bed Adsorber Behaviour”, in 12th International Conference on CFD in Oil {\&} Gas, Metallurgical and Process Industries, Trondheim, Norway, 2017.
, “Numerical Simulation of Adsorption Phenomena Using Multi-Region Approach”, in Proceedings, 2015.
, “Numerical Investigation of Particle Types Influence on Packed Bed Adsorber Behaviour”, in Proceedings, 2017.
, “Designing Better Membrane Modules Using CFD”, Chemical Product and Process Modeling, vol. 11, pp. 57–66, 2016.
, “Simultaneous Laser Doppler Velocimetry and stand-off Raman spectroscopy as a novel tool to assess flow characteristics of process streams”, Chemical Engineering Journal, vol. 334, pp. 123–133, 2018.
, “Impact of CFD Partitioning Strategies on Power Efficiency of High Performance Computing”, in Proceedings, 2017.
, “Numerische Simulation des Konzentrations- & und Strömungsprofiles in einem Festbettadsorber”, Chemie Ingenieur Technik, vol. 87, p. 1040, 2015.
, “Fully Resolved CFD Simulation of a Hollow Fibre Membrane Module”, Chemical Engineering Transactions, vol. 52, pp. 433–438, 2016.
, “Intracorporeal Membrane Catheter for CO₂ Reduction in a Blood-Membrane Contactor”, International Journal of Artificial Organs, vol. 40, p. 414, 2017.
, “Investigation of dependence of gas flow on the geometry of cyclonic separators by CFD simulations”, in CHISA 2004 - 16\textsuperscript{th} International Congress of Chemical and Process Engineering, Prague, Czech Republic, 2004.
, “CFD Simulation of blood gas transport in a hollowfiber membrane packing for design optimization of intracorporal CO2 removal catheters”, in 8th World Congress of Biomechanics, WCB 2018, Dublin, Ireland, 2018.
, “TUW-IVT and K1-MET - Cooperation Highlights”, Annual K1-Met Simulation Conference. 2018.
, “Local Contact Point Treatment in Sphere Packings”, in 2nd International Symposium on Computational Particle Technology and 13th International Conference on CFD in the Minerals and Process lndustries, Melbourne, Australien, 2018.
, “CFD Simulation einer Blasensäule mit dem VOF Modell - Fluent vs. OpenFOAM vs. Experiment”, in Chemie Ingenieur Technik, 9, 2008.
, “Intracorporeal Membrane Catheter for CO₂ Reduction in a Blood-Membrane Contactor”, in ESAO 2017 - 44th Annual Congress of the European Society for Artificial Organs, Vieanna, Austria, 2017.
,