Publications
“On the Applicability of RANS-Turbulence Models in CFD Simulations for the Description of Turbulent Free Jets During Biomass Combustion”, Chemical Engineering Transactions, vol. 39, pp. 913–918, 2014.
, “Behandlung von turbulenten Drall-Freistrahlen mit CFD”, in Chemie Ingenieur Technik, 8, 2005.
, “CFD optimisation and analysis of existing AD and Biorefineries Report”, European Comission, 2021.
, “CFD simulation of a solid biomass combustor: modelling approaches for the reduction of emissions and maximisation of the thermal efficiency”, in Summaries 4 - System Engineering, 2006.
, “CFD simulation of a solid biomass combustor: modelling approaches for the reduction of emissions and maximisation of the thermal efficiency”, in Summaries 4 - System Engineering, 2006.
, “CFD simulation of a solid biomass combustor: modelling approaches for the reduction of emissions and maximisation of the thermal efficiency”, in Summaries 4 - System Engineering, 2006.
, “CFD Simulation of Bubble Columns using the VOF Model : Comparison of commercial and Open Source Solvers with an Experiment”, Chemical Engineering Transactions, vol. 18, pp. 605–610, 2009.
, “CFD simulation of straight and slightly swirling turbulent free jets using different RANS-turbulence models”, Applied Thermal Engineering, vol. 89, pp. 1117–1126, 2015.
, “CFD-modelling for the combustion of solid baled biomass”, in Fifth International Conference on CFD in the Process Industries CSIRO, 2006.
, “CFD-modelling for the combustion of solid baled biomass”, in Fifth International Conference on CFD in the Process Industries CSIRO, 2006.
, “CFD-Simulation der Biomasseverbrennung unter Anwendung leistungsfähiger Modellansätze”, Chemie Ingenieur Technik, vol. 86, pp. 1618–1619, 2014.
, “CFD-simulation of a baled biomass-fired furnace: Combustion modelling and design optimisation for the reduction of emissions”, in Second World Biomass Conference Rome, Florence, 2004.
, “Collocation Method for the Modeling of Membrane Gas Permeation Systems”, International Journal of Nonlinear Sciences and Numerical Simulation, vol. 15, pp. 307–316, 2014.
, “Computational fluid dynamic simulation of a solid biomass combustor: modelling approaches”, Clean Technologies and Environmental Policy, vol. 10, pp. 165–174, 2008.
, “Computational fluid dynamic simulation of a solid biomass combustor: modelling approaches”, Clean Technologies and Environmental Policy, vol. 10, pp. 165–174, 2008.
, “Development of Agitation Systems in Biogas Plants : Investigation of Mixing Characteristics, Improvement of Energy Efficiency and Scale-up using CFD”, Chemical Engineering Transactions, vol. 21, pp. 1195–1200, 2010.
, “Engineering of three-dimensional pre-vascular networks within fibrin hydrogel constructs by microfluidic control over reciprocal cell signaling”, Biomicrofluidics, vol. 12, 2018.
, “Experimental study of fouling issues in a biomass pellet driven Stirling engine”, in 5. Central European Biomass Conference, Graz, Austria, 2017.
, “Fully Resolved CFD Simulation of a Hollow Fibre Membrane Module”, Chemical Engineering Transactions, vol. 52, pp. 433–438, 2016.
, “Implementation and Validation of a Three-Dimensional Multiphase-CFD-Model for Blast Furnace Processes”, Chemical Engineering Transactions, vol. 29, pp. 925–930, 2012.
, “Injection of heavy fuel oil and other auxiliary reduction agents into a blast furnace raceway”. 2011.
, “Investigation of Alternative Reducing Agent Conversion in the Raceway Cavity of Blast Furnaces by Numerical Simulation”, in Proceedings, 2016.
, “Investigation of Alternative Reducing Agent Injection into the Raceway of Blast Furnaces using CFD”, Chemical Engineering Transactions, vol. 35, pp. 1345–1350, 2013.
, “Investigation of the SO₂ Production Process by Combustion of Sulphur - Containing Substances Using CFD”, in Sulphur 2010 Technical Preprints, 2010.
, “Membrane modeling using CFD: Combined evaluation of mass transfer and geometrical influences in 1D and 3D”, Journal of Membrane Science, vol. 563, pp. 199-209, 2018.
,