@conference {359,
	title = {Modelling of Multi Stage Internal Loop Air Lift Bioreactor Utilizing Computational Fluid Dynamics},
	booktitle = {17th Minisymposium Verfahrenstechnik},
	year = {2023},
	month = {April},
	publisher = {University of Natural Resources and Life Sciences (BOKU), Department of Material Sciences and Process Engineering, Institute for Chemical and Energy Engineering, Muthgasse 107, A-1190 Wien editor= Bernhard Kling and Thomas Keller pages=84-89},
	organization = {University of Natural Resources and Life Sciences (BOKU), Department of Material Sciences and Process Engineering, Institute for Chemical and Energy Engineering, Muthgasse 107, A-1190 Wien editor= Bernhard Kling and Thomas Keller pages=84-89},
	author = {Ramonet, Fernando and Haddadi, Bahram and B{\"o}senhofer, Markus and Harasek, Michael}
}
@proceedings {338,
	title = {Modelling And Characterization Of Internal Loop Air Lift Bioreactor Configurations Through Computational Fluid Dynamics},
	year = {2022},
	month = {05/2022},
	author = {Ramonet Marques, Fernando and Haddadi, Bahram and Harasek, Michael}
}
@article {339,
	title = {Modelling and Design of Optimal Internal Loop Air-Lift Reactor Configurations Through Computational Fluid Dynamics},
	journal = {Chemical Engineering Transactions},
	volume = {94},
	year = {2022},
	month = {Sep.},
	pages = {817-822},
	doi = {10.3303/CET2294136},
	url = {https://www.cetjournal.it/index.php/cet/article/view/CET2294136},
	author = {Ramonet, Fernando and Haddadi, Bahram and Jordan, Christian and Harasek, Michael}
}
@article {314,
	title = {Modeling the effective thermal conductivity of hollow bricks at high temperatures},
	journal = {Construction and Building Materials},
	volume = {309},
	year = {2021},
	pages = {125066},
	abstract = {<p>In this work, we derive a model for the anisotropic effective thermal conductivity of bricks based on the unit cell model approach. The presented model considers conduction and surface-to-surface radiation in the brick. Four different radiation models are presented, compared, and validated using fully resolved computational fluid dynamics simulations for three different brick profiles and experiments. Good agreement with fully resolved computational fluid dynamics simulations with and without radiation is found. The validated model was then applied in a global sensitivity study and to simulate the temperature distribution in brick stacks in a tunnel kiln segment under firing conditions.</p>
},
	keywords = {Computational fluid dynamics (CFD), Effective thermal conductivity, Global sensitivity study, Hollow bricks, Numerical simulation, Radiation modeling},
	issn = {0950-0618},
	doi = {https://doi.org/10.1016/j.conbuildmat.2021.125066},
	url = {https://www.sciencedirect.com/science/article/pii/S0950061821028117},
	author = {Mario Pichler and Bahram Haddadi and Christian Jordan and Michael Harasek}
}
@proceedings {261,
	title = {Membrane contactors for biomedical applications},
	year = {2019},
	publisher = {EWM 2019},
	address = {B{\r a}stad, Sweden},
	author = {Harasek, Michael and Lukitsch, Benjamin and Ecker, Paul and Janeczek, Christoph and Gf{\"o}hler, Margit}
}
@conference {249,
	title = {Mesh Partitioning of Reactive Flow Simulations {\textendash} Speed-up and Other Side Effects},
	booktitle = {9th European Combustion Meeting},
	year = {2019},
	month = {04/2019},
	address = {Lisbon, Portugal},
	author = {Wartha, E.-M. and B{\"o}senhofer, M. and Jordan, C. and Harasek, M.}
}
@conference {250,
	title = {Multi-Phase Reactive Systems {\textendash} Analysis of Involved Time Scales},
	booktitle = {9th European Combustion Meeting},
	year = {2019},
	month = {04/2019},
	address = {Lisbon, Portugal},
	author = {M. B{\"o}senhofer and Wartha, E.-M. and Jordan, C. and K{\"o}nig, B. and Harasek, M.}
}
@article {260,
	title = {Membrane modeling using CFD: Combined evaluation of mass transfer and geometrical influences in 1D and 3D},
	journal = {Journal of Membrane Science},
	volume = {563},
	year = {2018},
	pages = {199-209},
	abstract = {<p>In current literature two main approaches are used for the simulation of membrane contactors. One route considers membrane modules only in 1D for process simulation applications, the other route focuses on 3D simulation of modules using Computational Fluid Dynamics to provide very detailed information about membrane mass transfer or geometrical influences on the module performance. A new CFD algorithm is introduced in the current work. It is capable of performing both 3D and 1D simulations using the same code {\textendash} 1D to be used in fast process simulation applications whereas the 3D method can be applied for fully resolved CFD applications. Using experimental results from pure gas permeation of a hollow fiber module, it was demonstrated that 1D and 3D simulations compare with less than 2\% deviation on a global scale. Based on the 3D simulations, it was found that the arrangement of the fibers can lead to high velocity zones close to the module walls. It was demonstrated that the 1D CFD method performs well even for almost pure gases like CH4 at retentate side, by running simulations of a pilot scale biogas separation module in co- and counter-current configurations.</p>
},
	keywords = {Computational Fluid Dynamics, Gas permeation, Module performance, Multicomponent separation, Process simulation},
	issn = {03767388},
	doi = {10.1016/j.memsci.2018.05.040},
	url = {https://www.sciencedirect.com/science/article/pii/S0376738817335998?via\%3Dihub},
	author = {Haddadi, Bahram and Jordan, Christian and Miltner, Martin and Harasek, Michael}
}
@conference {259,
	title = {The Minimally Invasive Liquid Lung Catheter: In-Vitro Results in a Model Environment},
	booktitle = {45th ESAO Congress},
	year = {2018},
	month = {08/2018},
	publisher = {International Journal of Artificial Organs Vol 41},
	organization = {International Journal of Artificial Organs Vol 41},
	address = {Madrid, Spain},
	doi = {10.1177/0391398818785526},
	url = {https://journals.sagepub.com/doi/10.1177/0391398818785526},
	author = {Janeczek, Christoph and Ecker, Paul and Huber-Dangl, Florentine and Karabegovic, Alen and Lukitsch, Benjamin and Harasek, Michael and Jordan, Christian and Ullrich, Roman and Gf{\"o}hler, Margit}
}
@unpublished {235,
	title = {Multi-phase Reacting Flows in OpenFOAM{\textregistered}},
	number = {14},
	year = {2017},
	author = {B{\"o}senhofer, Markus and Jordan, Christian and Harasek, Michael}
}
@conference {184,
	title = {Modellierung turbulenter Freistrahlen mit numerischer Str{\"o}mungssimulation (CFD)},
	booktitle = {Chemie Ingenieur Technik},
	year = {2005},
	publisher = {WILEY-VCH},
	organization = {WILEY-VCH},
	address = {8},
	author = {Jordan, Christian and Miltner, Martin and Potetz, Angela and Harasek, Michael}
}
@article {142,
	title = {Modeling and optimisation of novel membrane/adsorbent-based extracorporeal blood purification devices by computational fluid dynamics},
	journal = {International Journal of Artificial Organs},
	volume = {24},
	year = {2001},
	pages = {551},
	author = {Harasek, Michael and Strobl, W and Friedl, Anton and Falkenhagen, Dieter}
}
